Extension Boards
Access Control Systems - AUX Access Control Equipment
Overview:
TCP/IP
The TCP/IP is our basic network extension device for the IC1604, IC2000 or IC4000.
The board has a TCP/IP interface through a standard 10baseT RJ45 connector, together with an
RS485 bus for connecting to other network devices.
The TCP/IP allows the controller to join an existing LAN or WAN network, or to connect directly to a
computer running the GuardPoint Pro access control software.
TCP/IP-IR
The TCP/IP-IR is the same basic board as the TCP/IP, but also has 8 supervised inputs and status
LEDs, and 4 outputs and status LEDs. There are additional terminals for the LEDs of readers 3 and
4 when being used with an IC2000 or IC4000.
As with the TCP/IP, the TCP/IP-IR allows the controller to join an existing LAN or WAN network, or
to connect directly to a computer running the GuardPoint Pro access control software.
IR-LED
The IR-LED extension board is designed to plug directly onto an IC1604, IC2000 or IC4000, and
expands the parent board by 8 supervised inputs and status LEDs, and 4 outputs and status LEDs.
The board also has terminals for the LEDs of readers 3 and 4 when using an IC2000 or IC4000.
The IR-LED is the perfect and affordable way to meet your site requirements without the need to
purchase further controllers.
RLY-12
The RLY-12 (Relay 12) is Sensor’s affordable and simple solution when you require more than the
usual 4 relays that our controllers offer. Designed to plug directly onto an IC1604, IC2000 or
IC4000, the RLY-12 expands the parent board by a further 12 relays to a total of 16.
Each of the expansion relays comes with a status LED, and a separate terminal point to allow for
the wiring of locks or other door control devices.